Z.F. Wang, Y. Boonyongmaneerat, K.S. Kumar, and C.L. Briant, “Hydride Formation in Grade 2 Titanium Exposed to Sea Water for Extended Times,” Corrosion/2001, NACE, p.11, 2001.
Y. Boonyongmaneerat and C.A. Schuh, T.W. Eagar, “Strategies for Bonding W and Al2O3 at Low Temperatures,” Advances in Ceramic Coatings and Ceramic-Metal Systems, CESP, vol. 26, 3, 2005, pp.399-406.
Y. Boonyongmaneerat and C.A. Schuh, Contributions to the Interfacial Adhesion in Co-Sintered Bilayers, Metallurgical and Materials Transactions A, vol. 37A, 2006.
Y. Boonyongmaneerat, Mechanical Properties of Partially-Sintered Materials, Materials Science and Engineering A, vol. 452-453, pp. 773-780, 2007.
J.M. LeBeau and Y. Boonyongmaneerat, Comparison Study of Aqueous Binder Systems for Slurry-Based Processing, Materials Science and Engineering A, vol. 458, pp. 17-24, 2007.
Y. Boonyongmaneerat, M. Chmielus, D.C. Dunand, and P. MÃ¼llner, Increasing magnetoplasticity in polycrystalline Ni-Mn-Ga by reducing internal constraints through porosity , Physical Review Letters, 99, 247201, pp.1-4, 2007.
Y. Boonyongmaneerat and D.C. Dunand, Ni-Mo-Cr Foams Processed by Casting Replication of Sodium Aluminate Preforms , Advanced Engineering Materials, 10, 4, pp. 379-83, 2008.
Y. Boonyongmaneerat, C.A. Schuh, and D.C. Dunand, Mechanical Properties of Reticulated Aluminum Foams with Electrodeposited Ni-W Coatings, Scripta Materialia, Vol. 59, Issue 3, pp. 336-339, 2008.
Y. Boonyongmaneerat, Effects of Low-Content Activators on Low-Temperature Sintering of Tungsten, Journal of Materials Processing and Technology, 209(8), pp.4084-4087, 2008.
Y. Boonyongmaneerat and D.C. Dunand, Effects of Strut Geometry and Pore Fraction on Creep Properties of Cellular Materials, Acta Materialia , 57, pp. 1379-1384, 2008.
S. Asavavisithchai, E. Nisaratanaporn, and Y. Boonyongmanerat, “A novel method to produce silver foams with multi-level porosities,” Chiang Mai Journal of Science, 37(2), pp.1-6, 2009.
Y. Boonyongmaneerat, K. Saengkiettiyut, S. Saenapitak, and S. Sangsuk, Effects of WC addition on structure and hardness of electrodeposited Ni-W,” Surface & Coatings Technology, 203, pp. 3590-4, 2009.
Y. Boonyongmaneerat, S. Saenapitak, and K. Saengkiettiyut, Reverse pulse electrodeposition of Zn-Ni alloys from a chloride bath, Journal of Alloys and Compounds, vol. 487, pp. 479-482, 2009.
P. Mullner, X. Zhang, Y. Boonyongmaneerat, C. Witherspoon, M. Chmielus, D.C. Dunand, Recent developments in Ni-Mn-Ga foam research, Materials Science Forum, Vol. 635, pp. 119-124, 2010.
Y. Boonyongmaneerat, K. Saengkiettiyut, P. Rattanawaleedirojn, C. Angkaprasert, J. Wanichsampan, S. Saenapitak, Layer formation of hot-dip galvanized steels as influenced by NiCl2-base fluxes, Journal of Iron and Steel Research, International (2010).
Y. Boonyongmaneerat, K. Saengkiettiyut, S. Saenapitak, S. Sangsuk, Pulse co-electrodeposition and characterization of NiW-WC composite Coatings, Journal of Alloys and Coatings, 2010.
S. Sukkasi, U. Sahapatsombut, C. Sukjamsri, S. Saenapitak, Y. Boonyongmaneerat, “Electroless Ni-based coatings for biodiesel containers,” Journal of Coatings Technology and Research, 2010.
Y. Boonyongmaneerat, C. Sukjamsri, U. Sahapatsombut, S. Saenapitak, S. Sukkasi, Electroless Ni-based coatings for biodiesel containers, Applied Energy, 2010.
R. Sa-nguanmoo, E. Nisarattanaporn1, Y. Boonyongmaneerat, “Hot-dip galvanization with pulse-electrodeposited nickel pre-coatings,” Corrosion Science, 2010.